Edsal 1UFD1 User Manual download pdf

1/4-20 x 5/8”

Nuts, Bolts & Washers (16 ea.

Req’d)

*** IMPORTANT SAFETY INSTRUCTIONS PLEASE READ FIRST ***

When moving the cabinets on the dolly, always push from the sides of the cabinet. NEVER push from

the front, back, or top. This can cause a “tipping” hazard, which can result in a serious injury to your-

self or others. NEVER pull the cabinet during movement, push the cabinet to the location necessary.

Always move the cabinet over a flat level surface. Rough surfaces cause the cabinet to vibrate, which

causes the cabinet’s load to increase in weight, or again may cause a “tipping” hazard which can re-

sult in a serious injury to yourself or others. Always make sure when moving the cabinet the doors are

closed and locked. Doors may open and spill the contents inside. Also after movement, carefully open

the doors. It is possible that the cabinets contents may have shifted, and may fall from the cabinet.

Do not use this dolly for anything other than the manufactures intended purpose. NEVER stand on or

ride on the cabinet. Use the caster brakes to hold the dolly in position when it is stationary. DO NOT

OVERLOAD. Make sure items are evenly distributed on each shelf, and that the heavier items are

placed at the bottom. Do not store any items on the top of the cabinet during movement, this may

cause a “falling” hazard that can injure yourself or others.

Assembly Instructions

This instruction sheet was designed to help you assemble the dolly

in the proper way, please follow them using all parts and fasteners

provided. Any alteration or deviation from these instructions can

result in dolly and cabinet failure. After assembly is complete, make

sure the dolly is placed on a level surface as this may effect the per-

formance of the unit.

Place the dolly base on it’s side and align the brake and swivel

casters with the proper holes on the dolly base (see figure 1). In-

stall the 1/4-20 x 5/8” bolts through the dolly base and into the holes

of the casters. Apply the washers and nuts and tighten appropri-

ately (see figure 2). Turn the dolly right side up, lock the caster

brakes and place the cabinet into the dolly.

Should you have any comments, damage, missing parts, or problems with assembly

of this unit please feel free to contact our Edsal manufacturing facility at, (773)

475-3000 and request customer service. We can also be reached on the internet at

the following email address , [email protected]

To obtain replacement parts, please provide the following information :

- Model # - Part # & Description - Location Purchased - Date Purchased

Edsal Manufacturing

4400 South Packers Avenue

Chicago, IL 60609

www. edsal.com

CA5125R - Swivel

Caster (2 req’d)

CPDT3921 - 36 1/2” x 18 1/2” Tray (1 req’d)

CPDT3927 - 36 1/2” x 24 1/2” Tray (1 req’d)

Caster Kit

Instruction Sheet

Figure 2

Figure 1

CA5125SB—Swivel Caster

w/ Brake (2 req’d)

Models DO3618, DO3624,

1UFC5, 1UFC6, 1UFC7, 1UFC8,

1UFC9, 1UFD1

Summary of Contents

Page 1

1/4-20 x 5/8” Nuts, Bolts & Washers (16 ea. Req’d) *** IMPORTANT SAFETY INSTRUCTIONS PLEASE READ FIRST ****** IMPORTANT S

Related models: DO3618 | DO3624 |

Comments to this Manuals

No comments

Edsal 1UFD1 User Manual

Browse online or download User Manual for Furniture Edsal 1UFD1. Edsal 1UFD1 User Manual

Summary of Contents

Related models: DO3618 | DO3624 |

Comments to this Manuals

Related products and manuals for Furniture Edsal 1UFD1